The handpiece emits light of a wavelength close to infrared, which is absorbed by the melanin located in the hair follicle. The laser beam is emitted only for a fraction of a second, which is long enough to damage the follicle while leaving the surrounding tissues intact, thanks to the cooling system at the tip of the handpiece, which protects the skin during laser energy emission.

Shaving, waxing, depilatory creams, are all temporary systems that need to be repeated frequently and none of them can offer a reduction in growth or treat ingrown hairs. The semiconductor laser guarantees a permanent reduction in the number of hairs and is also effective on ingrown hairs.

When using the semiconductor laser in the operating mode called “motion speed” the treatment is practically painless. By using higher fluences, the sensitivity to treatment is higher and varies from person to person.

IceSpeed and AlexPro can effectively and safely treat all skin phototypes (Fitzpatrick I-VI) and even tanned skin. For darker phototypes and tanned skin, there are special parameters: generally lower energy levels and longer pulse duration are used to avoid skin damage. By selecting the right parameters, any skin type can benefit from semiconductor laser hair removal treatment.

Semiconductor lasers have a proven effectiveness for permanent hair reduction on all skin types, including tanned skin. To achieve satisfactory results, 3-5 treatments are generally required.

The Nd:YAG LP laser offers important advantages compared to injection therapy or electrocoagulation, allowing the treatment of vascular lesions even difficult to resolve. In addition, laser therapy is fast, less painful and minimally invasive.

Mature hemangioma can be very thick and invasive and therefore occur both on the superficial area of the skin and in the deeper one. Thanks to the Nd:YAG LP laser, it is possible to treat hemangioma on the surface and in depth. Few applications are required to treat most hemangiomas successfully.

The working principle of Q-switched nd:YAG laser is based on the fragmentation of tattoo ink through the selective absorption of two specific wavelengths, 1064 and 532nm, selected according to pigment color. After the absorption of light, the ink particles are partially destroyed and reduced to smaller fragments. Subsequently, the ink fragments undergo phagocytosis by macrophages (cells responsible for the removal of foreign particles) and are removed from the body through the lymphatic system.

The removal of a professional tattoo is usually a progressive process that requires a series of sessions, carried out with an interval of at least 6-8 weeks. Professional tattoos usually require 5-10 sessions to achieve a satisfactory result. The factors that determine the number of applications required are the depth, color, amount of ink and location of the tattoo. Usually amateur or superficial tattoos are removed in fewer sessions.

Most acquired or congenital benign skin, epidermal or dermis lesions can be treated with the Q-switched nd:YAG laser. Clinical indications are numerous: freckles, café au lait spots, ephelids, pigmented lesions on the dermis, such as Nevus of Ota, Nevus of Ito, Nevus of Hori, and other congenital and non-congenital pigmented lesions.

The Erbium Yag laser is designed as a treatment of choice to regenerate the skin both deep down and on the surface. The emitted wavelength is absorbed by the water contained in the skin. The laser pulses treat wrinkles, scars, dark spots and other skin irregularities layer after layer. In addition, this process stimulates the formation of new collagen which provides better elasticity and support to the skin.

Erbium YAG laser is indicated for skin lesions such as sun keratosis, slightly atrophic facial scars (acne, chickenpox), dyschromia (melasma, freckles), facial wrinkles. Using pulses of variable depth, even patients with deeper wrinkles can achieve excellent results.

CO2 laser has become popular among cosmetic surgeons, and its advantages and limitations are well documented. Erbium YAG laser produces a laser beam that has a very high affinity with the water contained in the tissues, higher than CO2 laser; indeed, the 2940nm wavelength has the ability to absorb water 16 times more than CO2 laser, so its penetration into the skin, although lower, is still very effective, performing at the same time, a less aggressive action with much faster recovery time.

The CPL applicator effectively treats skin rejuvenation by emitting a wide spectrum of wavelengths absorbed by different chromophores (targets) in the skin: pigment and water. This technology provides excellent results in the treatment of a variety of problems, including skin blemishes, freckles, rosacea and couperose, wrinkles and fine lines, dilated pores, skin laxity and other imperfections. CPL treatments give the skin a youthful appearance and do not require long recovery times.

The speed, effectiveness and safety of the treatment guarantee patient satisfaction. No special post-treatment recovery time is required and normal daily activities can be resumed immediately. Patients may notice a marked improvement after just a few treatments.

The CPL applicator has revolutionized the treatment of acne; indeed, its selective action fights the most common bacteria that cause acne effectively, without medication, without particular discomfort and without downtime. The CPL applicator has proven to be one of the safest and most effective procedures available for the treatment of acne.

The Photofacial procedure is particularly suitable for younger patients who begin to notice early spots, small wrinkles and uneven skin tone, and want or need intensive treatment that can initiate a deep regeneration process to prevent and slow down skin ageing.

It is possible to feel a slight discomfort during treatment, but this is well tolerated by the majority of patients. The first treatment is usually the most irritating, then the procedure becomes more tolerable. The time required for a treatment usually varies from 30 to 90 minutes, depending on the size of the area to be treated.

The broad spectrum of emission combined with the high level of energy available, allows a therapeutic approach to the problems related to rosacea, ensuring excellent patient satisfaction.

The Alex 755 laser is a solid-state laser which emits light of a wavelength close to infrared . The wavelength of high energy light emitted by the laser is converted to heat energy and this damages the specific target area. The laser beam is emitted only for a fraction of a second, which is long enough to damage the target while leaving the surrounding tissues intact.

Shaving, waxing, depilatory creams, are all temporary systems that need to be repeated frequently and none of them can offer a reduction in growth or treat ingrown hairs. The Alex 755 guarantees a long term results in hair reduction and is also effective on ingrown hairs.

Alex 755 laser hair removal offers a more powerful absorption of energy by the melanin chromophore, making it ideal for the widest range of hair types and colors, particularly light and fine hair. With more superficial penetration, the 755 nm wavelength targets the hair follicle bulge and is particularly effective for superficially embedded hair in areas such as the eyebrows and upper body.

Alex 755 can effectively and safely treat all skin phototypes (Fitzpatrick I-VI) and even tanned skin. For darker phototypes and tanned skin, there are special parameters: generally lower energy levels and longer pulse duration are used to avoid skin damage. By selecting the right parameters, any skin type can benefit from semiconductor laser hair removal treatment.

Alex 755 lasers have a proven effectiveness for permanent hair reduction on all skin types. To achieve satisfactory results, 3-5 treatments are generally required.